# Mazda MX-5 Cup NC (2006–2015)

- Source: https://racingcarnetwork.com/wiki/mazda-mx-5-cup-nc/
- Publisher: Racing Car Network (racingcarnetwork.com), the race car marketplace
- Type: car · Brand: Mazda
- Discipline: touring
- Series: one-make-cup
- Era: 2000s
- Last updated: 2026-11-11

The NC MX-5 Cup car is the third-generation Mazda roadster prepared to a Mazdaspeed kit with a sealed 2.0-litre engine. It ran in the SCCA Pro Racing MX-5 Cup from 2006 to 2015. Today it is a budget club racer for SCCA and NASA, and the parts base of the Spec MX-5 class.

## Specifications

| Spec | Value |
|---|---|
| Engine | 2.0-litre Mazda MZR four-cylinder, dyno-checked and sealed for Mazda by Comptech USA [1] |
| Power | Not officially published; one 2013 estimate puts it near 195 bhp, about 25 bhp over stock [12] |
| Gearbox | Production Mazda 6-speed manual (Mazdaspeed part P601-03-000), unsprung 4-puck clutch [4] |
| Suspension | Mazdaspeed kit: adjustable Sachs dampers, uprated springs and anti-roll bars [4][7] |
| Brakes | Stainless lines, brake ducts and a choice of Hawk pads from the Mazdaspeed list [4] |
| Chassis | NC MX-5 soft-top roadster, welded roll cage; model years 2006 to 2014 accepted [4][13] |
| Weight | Cup-trim minimum not confirmed; 2,745 lb in SCCA T4, 2,500 lb as Spec MX-5 [5] |
| Years | Pro series 2006–2015; replaced by the ND car in 2016 [0][2] |
| Class | SCCA T4 and STL; Spec MX-5 (SCCA and NASA) after conversion [2][5][14] |

## History

Mazda launched the MX-5 Cup in 2006, the same year the third-generation NC roadster arrived. It replaced the regional Mazdaspeed Miata Cup with a national drivers' championship [4]. SCCA Pro Racing ran the series at first [0]. Unlike the later ND car, the NC Cup car was not sold complete. Mazda specified the equipment and teams built cars from road MX-5s using parts sold through Mazdaspeed [0][4].

AWR Racing helped Mazdaspeed develop the package. Two prototypes ran the 25 Hours of Thunderhill before the first season, and one rolled, which tested the new cage design [4]. The kit covered dampers, springs, intake, header, exhaust, oil cooler, radiator, clutch and brake parts [4]. The engine came sealed. Comptech USA later took over dyno checks, holding engines within one percent before sealing them [1]. Mazda says engines from 2009 onward gained a forged crank, forged rods and revised valve springs [1].

The series ran ten seasons on the NC, with a second class for the similar Skip Barber school cars [5]. Jim Daniels won the first title in 2006 [0]. Later champions included Eric Foss, Michael Cooper, Stevan McAleer and Kenton Koch [0][13]. The 2015 season was the last for the NC; the ND-based Global MX-5 Cup followed in 2016 [2][15].

The retired cars found new homes. Mazda pointed owners to SCCA and NASA classes in 2015 [2]. Danny Bender won the 2014 SCCA Touring 4 title in a converted ex-Cup car [8]. Many cars still sat idle, so Mazda Motorsports launched Spec MX-5 in 2019 for 2006–2015 NC cars [3][6]. That class reuses the Cup springs, anti-roll bars, intake, header and exhaust [5][7]. It became a Runoffs class in 2024 and a NASA national class in 2026 [0][14].

## Palmarès

The NC car carried the pro MX-5 Cup from 2006 to 2015, with Jim Daniels the first champion [0]. Eric Foss (2008), Michael Cooper (2011), Stevan McAleer (2012) and Kenton Koch (2014) all took titles before moving up the ladder [0][13]. John Dean II won the final NC season in 2015 [13]. Outside the series, Danny Bender won the 2014 SCCA Runoffs Touring 4 title in a former Cup car [8]. Elivan Goulart and Matt Fassnacht won Pirelli World Challenge Touring Car A titles in 2016 and 2017 with the car [0].

## What to check before you buy

Inspect the engine seals and the part number tag added at sealing: Sealed engines were dyno-matched and re-tagged; a broken seal means the engine is no longer a verified Cup unit. Ask which engine generation is fitted (2006–08 or 2009-on): 2009-on engines have forged crank and rods and rarely fail, according to Mazdaspeed. Ask whether the gearbox is an early unit and whether a billet 3rd/4th selector is fitted: Early NC 6-speeds break this selector on track, and the later part cannot be retrofitted. Identify the current trim: Cup, T4, STL or Spec MX-5, and get the logbook: Minimum weight and damper rules differ: 2,745 lb in T4 against 2,500 lb in Spec MX-5. Check which dampers are fitted: Sachs, non-adjustable Bilstein or Penske: Sachs means original Cup trim; Penske is required for Spec MX-5 and adds cost if missing. Ask whether the rear hubs have been upgraded: Hub upgrades are a common track fix and a meaningful extra cost if still to do. Budget a Spec MX-5 conversion before agreeing a price: One owner converting a T4 car spent about $12,000 in required parts, including a turnkey engine (2020).

## Did you know

- In 2013 the rules let a driver finishing 6th to 10th claim a top-five car's engine for $3,000 [12].
- One of the two development prototypes rolled four times at the 25 Hours of Thunderhill, a real test of the new cage [4].
- At least one Cup car began life in Mazda's press fleet when the NC was launched [5].

## Frequently asked questions

**How does the NC Cup car differ from the ND Cup car?** The NC car was a road MX-5 converted by teams with a Mazdaspeed kit and a sealed 2.0-litre engine. The ND car, from 2016, is a complete race car prepared by Long Road Racing and sold for $53,000 at launch. The ND has its own card on RCN.

**Is it a Spec Miata?** No. Spec Miata uses the first and second generation cars and has its own card. Mazda built Spec MX-5 around the NC to sit alongside Spec Miata, not replace it. In 2019 Mazda said ex-Cup prices were in the range of a nationally competitive Spec Miata.

**Where can I race an NC Cup car today?** In SCCA it can run in Touring 4 or Super Touring Lite, or in Spec MX-5 after conversion. NASA classes Spec MX-5 in ST5 and made it a national class for 2026. Endurance clubs such as ChampCar and WRL also class Spec MX-5 cars.

**What does a Spec MX-5 conversion cost?** One owner converting a T4 car in 2020 spent about $12,000 on required parts, including a turnkey engine. The main items are Penske dampers, a Roush CNC head, Mahle forged pistons and a new fuel rail. Labour is extra unless you do it yourself.

**How long does the sealed engine last?** Mazdaspeed said in 2015 that 2009-on engines, with forged crank and rods, rarely failed. One team had run the same engine for about four seasons. No official rebuild interval was published, so ask for the engine's race hours.

**Are parts still available?** Mazda Motorsports, formerly Mazdaspeed, supplied OEM and race parts for Cup cars in 2015 and still sells NC parts. Some Mazdaspeed items, like the uprated gearbox selector, are discontinued and now come from aftermarket suppliers.

## Sources

- 35 years of Mazda Miata: A racing legacy, part 2 — https://racer.com/2025/02/27/35-years-of-mazda-miata-a-racing-legacy-part-2/
- Balance of Power — https://www.mazdamotorsports.com/2015/03/03/balance-of-power/
- Future for the current MX-5 Cup cars — https://www.mazdamotorsports.com/2015/07/01/future-for-the-current-mx-5-cup-cars/
- Elevating the third-generation MX-5 — https://www.mazdamotorsports.com/2019/01/25/elevating-the-third-generation-mx-5/
- 2006 Mazda MX-5 Cup — https://www.awrracing.com/specmx5/mx5cup.html
- Spec Mazda MX-5 Super Touring Lite: Trying on the Next Generation — https://racer.com/2020/09/23/spec-mazda-mx-5-super-touring-lite-trying-on-the-next-generation/
- Spec MX-5 Unveiled by Mazda — https://grassrootsmotorsports.com/news/spec-mx-5-unveiled-by-mazda
- Pieces of the Spec MX-5 Puzzle — https://www.mazdamotorsports.com/2019/11/07/pieces-of-the-spec-mx-5-puzzle/
- Runoffs: Sweeps in Atlantic, T4 — https://www.mazdamotorsports.com/2014/10/13/runoffs-sweeps-in-atlantic-t4/
- MX5 NC 6 Speed 3rd / 4th Selector Issue — https://mx5parts.com.au/blogs/news/mx5-nc-6-speed-3rd-4th-selector-issue
- FS: 2009 MX-5 NC racecar $25000 — https://classicmotorsports.com/forum/cars-sale/fs-2009-mx-5-nc-racecar-25000/143015/page1
- 2007 Mazda MX-5 Miata (Spec MX-5) auction — https://www.pcarmarket.com/auction/2010-nc-mazda
- The Mazda MX-5 Cup — https://www.roadster.blog/2013/07/the-mx-5-cup.html
- Mazda MX-5 Cup — https://en.wikipedia.org/wiki/Mazda_MX-5_Cup
- NASA Chooses Spec Tire for Spec MX-5 and Publishes 2026 Rules — https://nasaspeed.news/columns/nasa-news/nasa-chooses-spec-tire-for-spec-mx-5-and-publishes-2026-rules/
- Want a Hand-Built Mazda MX-5 Miata Race Car for $53,000? — https://tflcar.com/2015/10/want-hand-built-mazda-mx-5-miata-race-car-53000/
- MX5 NC Mazda Motorsports Rear Hub and Bearing Upgrade — https://www.racingbeateurope.com/mx5-nc-mazda-motorsports-rear-hub-and-bearing-upgrade-9656-p.asp

## Related entries

- Mazda MX-5 Cup ND (2016–present) — https://racingcarnetwork.com/wiki/mazda-mx-5-cup-nd/
- Mazda Spec Miata (NA and NB, 1999–present) — https://racingcarnetwork.com/wiki/mazda-spec-miata/
- Toyota GT86 Cup race cars (2012–present) — https://racingcarnetwork.com/wiki/toyota-gt86-cup/
- Caterham Seven 310R race car (2017–present) — https://racingcarnetwork.com/wiki/caterham-seven-310r-race/
- BMW M240i Racing / M235i Racing (2014–2020) — https://racingcarnetwork.com/wiki/bmw-m240i-racing/
