# Radical PR6 Prosport (2006–2015)

- Source: https://racingcarnetwork.com/wiki/radical-pr6/
- Publisher: Racing Car Network (racingcarnetwork.com), the race car marketplace
- Type: car · Brand: Radical
- Discipline: sports-prototypes
- Series: sports-racer
- Era: 2000s
- Last updated: 2026-11-12

The Radical PR6 Prosport is a central-seat, motorcycle-engined sports racer built by Radical Sportscars from 2006 to 2015. It reworked the 1999–2006 Prosport, kept chain drive and used Powertec Suzuki Hayabusa-based engines of 1000cc to 1500cc. Light and simple, it now suits club racers, sprinters and hillclimbers on a modest budget.

## Specifications

| Spec | Value |
|---|---|
| Engine | Powertec Suzuki Hayabusa-based inline-4, dry sump; 1340cc standard in 2009, options from 1000cc to 1500cc [1][2] |
| Power | 210 bhp at 10,500 rpm (1340cc); 260 bhp with the 1500cc upgrade [2] |
| Torque | 130 lb ft (1340cc) [2] |
| Weight | 418 kg (920 lb) dry minimum [1] |
| Gearbox | Six-speed sequential, chain final drive to a torque-biasing limited-slip differential; pneumatic paddle shift optional [1][2] |
| Chassis | Powder-coated steel spaceframe with bonded aluminium panels, central driving position, FIA-tested front crash structure [1][2] |
| Brakes | Radical four-pot calipers, 240 x 25 mm vented discs; 280 mm floating discs optional [2] |
| Dimensions | Length 3786 mm, width 1554 mm, height 1025 mm, wheelbase 2210 mm [1][3] |
| Years | 2006–2015 [0] |
| Built | Chassis numbers run to 61; chassis 60 is a re-chassied 2007 car [0] |

## History

Radical began in 1996, when its first car ran and became the Clubsport [5]. The Prosport followed in 1999. In 2000 Radical ran sprint races for Clubsports and endurance races for Prosports [5]. The first Prosport, chassis 46, was finished in March 1999 and ended up with a Suzuki Hayabusa 1300 engine [4]. Regular Prosport production stopped in February 2006 [4].

The PR6, first badged PRO6, was a major rework of the Prosport [1]. Radical's brochure lists a new lighter spaceframe with a central driving position [1]. It also lists a new front diffuser, new side pods, a bi-plane rear wing and the SR4's reversing torque-biasing differential [1]. The first PR6, a works test car with a Suzuki 1000cc engine, was built in May 2006 [0]. The 2007 owner's manual and 2009 order form describe a six-speed sequential gearbox with chain final drive [2][3].

Engines came from Powertec, Radical's own engine business [3][12]. The brochure offered five Powertec engines from 1000cc to 1500cc, chosen to suit each championship [1]. For 2009 the standard unit was a 1340cc engine rated at 210 bhp, with a 260 bhp 1500cc as an option [2]. Owners later fitted Gen 2 Hayabusa 1475cc builds, RLM engines up to 1650cc and at least one supercharged 1340 [0][9].

The SR3 of 2002 had already moved to a gear-drive unit and a Quaife differential, but the PR6 kept its chain [5][13]. Co-founder Mick Hyde told Motor Sport in 2009 that chain drive worked well until power went up [5]. Chassis 28 was the last car with the PRO6 prefix, a K7 engine, an MBE 992 ECU and the pre-2009 chassis [0]. Output then dwindled. One PR6 was built in 2014, and the last, chassis 61, was delivered in August 2015 [0].

## Palmarès

The PR6 is a club racer, and its results come from national and regional series. Chassis 18 won the BRSCC OSS title in 2014, 2016 and 2018, and the Castle Combe Sports & GT title in 2013 [0]. A 1340cc PR6 won the Bikesports championship in 2012 after four straight top-three seasons [10]. Chassis 25 won the Andalucian championship in 2015 and raced in Scandinavia in 2016 [0]. Chassis 51 was runner-up in the 2012 Radical Clubman Cup [0]. PR6s raced in the Swedish Radical championship in 2012 [19]. PR6s still score points in Class A of the 750 Motor Club Radical Club Challenge [8].

## What to check before you buy

Read the chassis plate and confirm PRO6 or PR6 numbering: Prosports with RMS or RPS numbers are sold with PR6 bodywork, and a 2002 Prosport was auctioned as a 'Pro Sport / PR6'. Get engine hours since the last rebuild, the builder's invoice and the capacity: Rebuild timing depends on capacity. Hour meters and ECU logs can disagree. Press the dash data button to read the maximum revs recorded: The manual requires an engine inspection after any run over 12,000 rpm. Ask for hours on uprights, hubs, wishbones, driveshafts and calipers: Radical lifes these at 60 to 90 hours, and replacement adds up quickly. Find out whether it has the reversing diff, a Quaife non-reversing diff or electric reverse: Owners describe the original reversing diff as fragile and costly. Inspect the frame behind the bulkhead and around the front crash box for old damage: Radical does not supply Prosport frame sections, so repairs mean fabrication or a donor chassis. Match engine capacity and induction to the series you plan to enter: The 750MC Radical Club Challenge splits tuned engines up to 1500cc from RPE-spec engines and bans forced induction. Check belt, extinguisher and crash box dates: One 2018 seller noted out-of-date belts and an extinguisher needing service before racing.

## Did you know

- Only one PR6 was built in 2014 and one in 2015; chassis 61, delivered in August 2015, was the last [0].
- Chassis 60 started life in 2007 as chassis 7 and was re-chassied by the factory in January 2014 [0].
- Radical's 2007 manual warns that the PR6 can pull more than 2.5 g in corners [3].

## Frequently asked questions

**Is a PR6 the same car as a Prosport?** No. The Prosport was built from 1999 to 2006. The PR6, first called PRO6, arrived in 2006 with a new lighter spaceframe, central seat and new aero. Many Prosports now wear PR6 bodywork, so check the chassis prefix: PRO6 or PR6 for the newer car, RMS or RPS for a Prosport.

**Which engine should I look for?** The 2009 standard engine was a 1340cc Powertec unit with 210 bhp, and the 1500cc gave 260 bhp. Owners say the 1340 runs far longer between rebuilds. Larger RLM builds are quicker but cost more to keep. Match the capacity to your target series before you buy.

**How often does the engine need rebuilding?** Radical's 2007 manual says 30 racing hours. Owners report about 40 hours for 1500s and 80 to 100 hours for 1340s. Hours count engine run time, including warm-up, so on-track time is much lower. Budget several thousand dollars or pounds per rebuild.

**Should I buy a PR6 or an SR3?** The PR6 is a lighter central-seat car with chain drive, so it needs regular chain work. The SR3 uses a gear-drive unit with a Quaife differential and reverse, which Radical describes as nearly maintenance-free. The SR3 also has wider championship support today.

**Where can a PR6 race now?** In the UK it fits Class A or B of the 750 Motor Club Radical Club Challenge. It has also raced in Bikesports and BRSCC OSS. Many owners use them for sprints and hillclimbs. In the US, owners run them in SCCA and NASA classes.

**Can I still get parts?** Radical rebuilt and sold PR6s as late as 2016, but frame parts for the Prosport family are not sold. Owners trade used and new-old-stock parts, and engine specialists such as RLM still build Hayabusa engines for these cars.

## Sources

- PR6 Registry — https://radicalsportscarregistry.com/pr6-registry
- Radical Prosport PRO6 brochure — https://radicalsportscarregistry.com/wp-content/uploads/2018/09/Pro6spec.pdf
- 2009 Euro Order Form, Radical PR6 Prosport — https://radicalsportscarregistry.com/wp-content/uploads/2018/09/2009-Radical-PR6-Prosport-Euro-order-form.pdf
- PR6 Radical Owners Manual, issue 2 — https://radicalsportscarregistry.com/wp-content/uploads/2018/09/Radical-PR6-Owners-Manual.pdf
- Prosport Registry — https://radicalsportscarregistry.com/prosport-registry
- Radical hits the mainstream — https://www.motorsportmagazine.com/archive/article/march-2009/96/radical-hits-mainstream/
- Why do the engines need a rebuild every 40 hours — https://radicalsportscarregistry.com/radicalforum/getting-started/why-do-the-engines-need-a-rebuild-every-40-hours/
- Hayabusa engine questions, reliability and rebuilds — https://radicalsportscarregistry.com/radicalforum/general-discussion/hayabusa-engine-questions-reliability-and-rebuilds/
- Radical Club Challenge — https://750mc.co.uk/formulae/radical-club-challenge
- Radical PR6, 1475cc Hayabusa. Paddle shift. Spares. — https://www.racecarsdirect.com/Advert/Details/94819/radical-pr6-1475cc-hayabusa-paddle-shift-spar
- Radical PR6 1340 — https://www.racecarsdirect.com/Advert/Details/84684/radical-pr6-1340
- 2002 Radical Pro Sport / PR6 — https://collectingcars.com/for-sale/2002-radical-pro-sport-pr6
- Radical PR6 (sold) — https://vintageracecarsales.com/portfolio/radical-pr6/
- Radical SR3 Buyers Guide — https://radicalsportscarregistry.com/radical-sr3-buyers-guide/
- Radical Prosport frame parts — https://radicalsportscarregistry.com/radicalforum/prosport-specific-discussions/radical-prosport-frame-parts/
- Drive chain choice — https://radicalsportscarregistry.com/radicalforum/prosport-specific-discussions/drive-chain-choice
- Radical Prosport 1400 with PR06 bodywork & centre lock — https://www.racecarsdirect.com/Advert/Details/163968/radical-prosport-1400-with-pr06-bodywork-cent
- Radical Prosport Evo Hayabusa 1600cc — https://www.racecarsdirect.com/Advert/Details/151072/radical-prosport-evo-hayabusa-1600cc
- New Radical Hayabusa 1400 race engine — https://www.racecarsdirect.com/Advert/Details/163596/new-radical-hayabusa-1400-race-engine
- File:Oskar Andersson Radical PR6 Anderstorp 2012.jpg — https://commons.wikimedia.org/wiki/File:Oskar_Andersson_Radical_PR6_Anderstorp_2012.jpg
- Search results: radical pr6 — https://www.racingcarnetwork.com/?s=radical+pr6

## Related entries

- Radical SR3 — https://racingcarnetwork.com/wiki/radical-sr3/
- Radical SR1 — https://racingcarnetwork.com/wiki/radical-sr1/
- Radical SR8 — https://racingcarnetwork.com/wiki/radical-sr8/
- Radical RXC — https://racingcarnetwork.com/wiki/radical-rxc/
- Praga R1 — https://racingcarnetwork.com/wiki/praga-r1/
