Skip to main content
Mazda MX-5 Cup NC (2006–2015)
Photo: qJake · CC BY-SA 2.0 · via Wikimedia Commons
RCN Wiki · Touring Cars

Mazda MX-5 Cup NC (2006–2015)

The NC MX-5 Cup car is the third-generation Mazda roadster prepared to a Mazdaspeed kit with a sealed 2.0-litre engine. It ran in the SCCA Pro Racing MX-5 Cup from 2006 to 2015. Today it is a budget club racer for SCCA and NASA, and the parts base of the Spec MX-5 class.

One-Make CupMazdaSCCA T4 and STL; Spec MX-5 (SCCA and NASA) after conversion [2][5][14]
No Mazda MX-5 Cup NC (2006–2015) listed right now · get an email the moment one is listed
Model page →

History

Mazda launched the MX-5 Cup in 2006, the same year the third-generation NC roadster arrived. It replaced the regional Mazdaspeed Miata Cup with a national drivers' championship 5. SCCA Pro Racing ran the series at first 1. Unlike the later ND car, the NC Cup car was not sold complete. Mazda specified the equipment and teams built cars from road MX-5s using parts sold through Mazdaspeed 15.

AWR Racing helped Mazdaspeed develop the package. Two prototypes ran the 25 Hours of Thunderhill before the first season, and one rolled, which tested the new cage design 5. The kit covered dampers, springs, intake, header, exhaust, oil cooler, radiator, clutch and brake parts 5. The engine came sealed. Comptech USA later took over dyno checks, holding engines within one percent before sealing them 2. Mazda says engines from 2009 onward gained a forged crank, forged rods and revised valve springs 2.

The series ran ten seasons on the NC, with a second class for the similar Skip Barber school cars 6. Jim Daniels won the first title in 2006 1. Later champions included Eric Foss, Michael Cooper, Stevan McAleer and Kenton Koch 114. The 2015 season was the last for the NC; the ND-based Global MX-5 Cup followed in 2016 316.

The retired cars found new homes. Mazda pointed owners to SCCA and NASA classes in 2015 3. Danny Bender won the 2014 SCCA Touring 4 title in a converted ex-Cup car 9. Many cars still sat idle, so Mazda Motorsports launched Spec MX-5 in 2019 for 2006–2015 NC cars 47. That class reuses the Cup springs, anti-roll bars, intake, header and exhaust 68. It became a Runoffs class in 2024 and a NASA national class in 2026 115.

Palmarès

The NC car carried the pro MX-5 Cup from 2006 to 2015, with Jim Daniels the first champion 1. Eric Foss (2008), Michael Cooper (2011), Stevan McAleer (2012) and Kenton Koch (2014) all took titles before moving up the ladder 114. John Dean II won the final NC season in 2015 14. Outside the series, Danny Bender won the 2014 SCCA Runoffs Touring 4 title in a former Cup car 9. Elivan Goulart and Matt Fassnacht won Pirelli World Challenge Touring Car A titles in 2016 and 2017 with the car 1.

What to check before you buy

Inspect the engine seals and the part number tag added at sealing: Sealed engines were dyno-matched and re-tagged; a broken seal means the engine is no longer a verified Cup unit. Ask which engine generation is fitted (2006–08 or 2009-on): 2009-on engines have forged crank and rods and rarely fail, according to Mazdaspeed. Ask whether the gearbox is an early unit and whether a billet 3rd/4th selector is fitted: Early NC 6-speeds break this selector on track, and the later part cannot be retrofitted. Identify the current trim: Cup, T4, STL or Spec MX-5, and get the logbook: Minimum weight and damper rules differ: 2,745 lb in T4 against 2,500 lb in Spec MX-5. Check which dampers are fitted: Sachs, non-adjustable Bilstein or Penske: Sachs means original Cup trim; Penske is required for Spec MX-5 and adds cost if missing. Ask whether the rear hubs have been upgraded: Hub upgrades are a common track fix and a meaningful extra cost if still to do. Budget a Spec MX-5 conversion before agreeing a price: One owner converting a T4 car spent about $12,000 in required parts, including a turnkey engine (2020).

Versions and evolutions

VersionYearsWhat changedHow to identify
Early Cup car (2006–2008 engine)2006–2008Original-generation MZR engine. Early 6-speed with a cast 3rd/4th selector that is known to break on track. 2Check the engine generation and part tag with the seller or Mazda Motorsports. Ask whether the gearbox is an early unit.
Later Cup car (2009-on engine)2009–2015Same rated power and torque, but forged crank, forged rods and different valve springs. Model year 2009 gearboxes gained a stronger selector. 2Engine generation and part number tag. NC engines are interchangeable, so an early car may carry a later engine.
Skip Barber school carNC eraSimilar but slightly different car that raced as a second class within the series. 6History and paperwork from the Skip Barber school; differences from the Cup kit not documented in our sources.
T4 conversionFrom c.2014Cup suspension kept with non-adjustable dampers; SCCA T4 minimum weight 2,745 lb, plus 100 lb for the alternate suspension. 6Non-adjustable dampers (often Bilstein) and a T4 logbook.
Spec MX-5 conversion2020–presentSingle-adjustable Penske dampers, Roush CNC cylinder head, Mahle forged pistons, new fuel rail, 2,500 lb minimum. 8Penske dampers, Roush head and a Spec MX-5 logbook.

Known issues

  • Early 6-speed 3rd/4th selector breakage — Broken 3rd/4th selector on early NC gearboxes, mostly under track or race use. The stronger 2009 part does not fit earlier boxes. unknown; billet replacement selectors are sold for early boxes 10
  • Less durable 2006–2008 engines — Mazda's engine sealer said later motors with revised valve springs survive missed shifts better. Early engines lack the forged crank and rods. $3,745 plus freight for a sealed replacement engine (2015 price) 2
  • Mazdaspeed parts discontinued — Some original Mazdaspeed items, such as the uprated gearbox selector, are no longer made; owners rely on aftermarket copies. 10
  • Rear hubs under track loads — Owners upgrade the standard rear hubs for racing, either to RX-8 hubs or to a Mazda Motorsports competition hub with a larger bearing. £1,290 ex VAT per pair for the Mazda Motorsports hub kit; RX-8 retrofit about £1,700–2,500 17
  • Original Sachs dampers — The Cup car used complex adjustable Sachs dampers. Spec MX-5 replaced them with Penske units, so original dampers may be hard to service. Penske front damper $549 each (2020 price list, as reported); Sachs service cost unknown 8
  • Cars left standing since 2015 — Mazda noted many NC race cars sitting idle after the series moved to the ND. Expect aged tyres, fluids, belts and fire systems. 4

Checklist before you buy

  1. Inspect the engine seals and the part number tag added at sealing. — Sealed engines were dyno-matched and re-tagged; a broken seal means the engine is no longer a verified Cup unit. 2
  2. Ask which engine generation is fitted (2006–08 or 2009-on). — 2009-on engines have forged crank and rods and rarely fail, according to Mazdaspeed. 2
  3. Ask whether the gearbox is an early unit and whether a billet 3rd/4th selector is fitted. — Early NC 6-speeds break this selector on track, and the later part cannot be retrofitted. 10
  4. Identify the current trim: Cup, T4, STL or Spec MX-5, and get the logbook. — Minimum weight and damper rules differ: 2,745 lb in T4 against 2,500 lb in Spec MX-5. 6
  5. Check which dampers are fitted: Sachs, non-adjustable Bilstein or Penske. — Sachs means original Cup trim; Penske is required for Spec MX-5 and adds cost if missing. 8
  6. Ask whether the rear hubs have been upgraded. — Hub upgrades are a common track fix and a meaningful extra cost if still to do. 17
  7. Budget a Spec MX-5 conversion before agreeing a price. — One owner converting a T4 car spent about $12,000 in required parts, including a turnkey engine (2020). 6

Running costs 2

Rebuild intervalNo fixed interval published. Mazdaspeed reported few failures on 2009-on engines; one team ran an engine for about four seasons (2015).
Typical rebuild costSealed replacement engine $3,745 plus freight (2015). Spec MX-5 conversion about $12,000 in parts including a turnkey engine (2020).
ConsumablesSpec MX-5 now runs Hoosier SMX tyres at $290 each (2026). Brake pads were Hawk compounds in the Cup kit.
Spares availabilityIn 2015 Mazdaspeed stocked OEM and race parts for Cup cars. Some Mazdaspeed items are now discontinued and covered by aftermarket parts.

Where it races today

  • SCCA Club Racing · Spec MX-5 (SMX) — Runoffs-eligible national class since 2024. Needs Penske dampers, Roush head and Mahle pistons; Cup springs, bars, intake and exhaust carry over. 1
  • SCCA Club Racing · Touring 4 (T4) — Ex-Cup cars convert with non-adjustable dampers; 2014 Runoffs T4 won in a converted Cup car. 9
  • SCCA Club Racing · Super Touring Lite (STL) — Ex-Cup cars have raced in STL; a car built fully to Spec MX-5 rules runs at 2,500 lb. 6
  • NASA · Spec MX-5 / ST5 — Spec MX-5 was classed into ST5 in 2019 7 and became a NASA national class in 2026 15. 15
  • Endurance clubs (AER, ChampCar, WRL) · Spec MX-5 classification — Spec MX-5 was already classified in these series at launch in 2019. 7

Market prices

  • Typical former MX-5 Cup car, per Mazda Motorsports: about 20,000 USD (2019-01) 4
  • NC T4 car that took Runoffs pole, asking: 27,500 USD (2019-01) 4
  • 2009 NC racer with sealed MX-5 Cup engine and ECU, asking: 25,000 USD (2018-09) 11
  • 2007 NC built to Spec MX-5, sold at auction (PCARMARKET): 30,000 USD (2024-04) 12
  • New sealed MX-5 Cup engine from Mazdaspeed: 3,745 plus freight USD (2015-03) 2
  • New ND Global MX-5 Cup car, for comparison: 53,000 USD (2015-10) 16

In 2019 Mazda put ex-Cup cars near $20,000, close to a competitive Spec Miata. A Spec MX-5 conversion sold for $30,000 in April 2024; no NC Cup car was listed on RCN in November 2026.

Reference prices are dated and sourced; live asking prices are in the listings above.

Frequently asked questions

How does the NC Cup car differ from the ND Cup car?

The NC car was a road MX-5 converted by teams with a Mazdaspeed kit and a sealed 2.0-litre engine. The ND car, from 2016, is a complete race car prepared by Long Road Racing and sold for $53,000 at launch. The ND has its own card on RCN.

Is it a Spec Miata?

No. Spec Miata uses the first and second generation cars and has its own card. Mazda built Spec MX-5 around the NC to sit alongside Spec Miata, not replace it. In 2019 Mazda said ex-Cup prices were in the range of a nationally competitive Spec Miata.

Where can I race an NC Cup car today?

In SCCA it can run in Touring 4 or Super Touring Lite, or in Spec MX-5 after conversion. NASA classes Spec MX-5 in ST5 and made it a national class for 2026. Endurance clubs such as ChampCar and WRL also class Spec MX-5 cars.

What does a Spec MX-5 conversion cost?

One owner converting a T4 car in 2020 spent about $12,000 on required parts, including a turnkey engine. The main items are Penske dampers, a Roush CNC head, Mahle forged pistons and a new fuel rail. Labour is extra unless you do it yourself.

How long does the sealed engine last?

Mazdaspeed said in 2015 that 2009-on engines, with forged crank and rods, rarely failed. One team had run the same engine for about four seasons. No official rebuild interval was published, so ask for the engine's race hours.

Are parts still available?

Mazda Motorsports, formerly Mazdaspeed, supplied OEM and race parts for Cup cars in 2015 and still sells NC parts. Some Mazdaspeed items, like the uprated gearbox selector, are discontinued and now come from aftermarket suppliers.

Sources

  1. 35 years of Mazda Miata: A racing legacy, part 2, RACER (2025-02) — Series launch, SCCA Pro Racing, champions, World Challenge titles, Spec MX-5 Runoffs status (read via archive.org copy, live site rate-limited)
  2. Balance of Power, Mazda Motorsports (2015-03) — Comptech sealing, 1% window, $3,745 engine price, 2009 forged internals, engine life (read via archive.org copy)
  3. Future for the current MX-5 Cup cars, Mazda Motorsports (2015-07) — End of NC era, SCCA and NASA options, Mazdaspeed parts support (read via archive.org copy)
  4. Elevating the third-generation MX-5, Mazda Motorsports (2019-01) — Idle NC race cars, ex-Cup price about $20,000, T4 car $27,500, $30,000 build target (read via archive.org copy)
  5. 2006 Mazda MX-5 Cup, AWR Racing (c. 2006-2010) — Development with Mazdaspeed, Thunderhill prototypes, Mazdaspeed parts list (Sachs, Hawk, RacingCages.com, 6-speed, clutch)
  6. Spec Mazda MX-5 Super Touring Lite: Trying on the Next Generation, RACER (2020-09) — Skip Barber class, carry-over parts, T4 and Spec MX-5 weights, $12,000 conversion, press-fleet car (read via archive.org copy)
  7. Spec MX-5 Unveiled by Mazda, Grassroots Motorsports (2019-08) — Spec MX-5 launch for 2006-2015 NC, NASA ST5, AER/ChampCar/WRL classing, Roush/Penske/Pagid/Toyo spec
  8. Pieces of the Spec MX-5 Puzzle, Mazda Motorsports (2019-11) — Cup carry-over parts, Sachs vs Penske dampers, Roush head, Mahle pistons (read via archive.org copy)
  9. Runoffs: Sweeps in Atlantic, T4, Mazda Motorsports (2014-10) — Bender's 2014 T4 title in a former Cup car (read via archive.org copy)
  10. MX5 NC 6 Speed 3rd / 4th Selector Issue, MX5 Parts (Australia) (2014-10) — Early 6-speed selector breakage, 2009 fix, no retrofit, discontinued Mazdaspeed part
  11. FS: 2009 MX-5 NC racecar $25000, Classic Motorsports forum (2018-09) — Asking price of a 2009 NC racer with sealed Cup engine and ECU
  12. 2007 Mazda MX-5 Miata (Spec MX-5) auction, PCARMARKET (2024-04) — Sale result of a Spec MX-5 NC, $30,000
  13. The Mazda MX-5 Cup, Roadster.Blog (2013-07) — Power estimate, engine claim rule, hardtop ban and kit rules as of 2013
  14. Mazda MX-5 Cup, Wikipedia (2026) — Champions by year, model years accepted
  15. NASA Chooses Spec Tire for Spec MX-5 and Publishes 2026 Rules, NASA Speed News (2026-01) — Spec MX-5 NASA national class from 2026, Hoosier SMX tyre prices
  16. Want a Hand-Built Mazda MX-5 Miata Race Car for $53,000?, TFLcar (2015-10) — ND Cup car price and Long Road Racing build, for comparison
  17. MX5 NC Mazda Motorsports Rear Hub and Bearing Upgrade, Racing Beat Europe (2026) — Rear hub track upgrade, kit price, RX-8 retrofit cost

Did you know

  • In 2013 the rules let a driver finishing 6th to 10th claim a top-five car's engine for $3,000 13.
  • One of the two development prototypes rolled four times at the 25 Hours of Thunderhill, a real test of the new cage 5.
  • At least one Cup car began life in Mazda's press fleet when the NC was launched 6.

More Mazda for sale

View all →

No Mazda MX-5 Cup NC listed right now — here are other Mazda machines on the market.

Parts, spares & upgrades

Browse parts →